Tag Archives: M.Tech.

NIELIT Calicut M.Tech Admissions – 2015

NIELITNATIONAL INSTITUTE OF ELECTRONICS AND INFORMATION TECHNOLOGY
(NIELIT, CALICUT)
Ph: +91-495-2287266; Fax: +91-495-2287168
Email: mtech@calicut.nielit.gov.in
Website: calicut.nielit.gov.in

About the Institute: National Institute of Electronics and Information Technology (NIELIT), Calicut is an autonomous body of Department of Electronics and Information Technology (DeitY), Ministry of Communications & Information Technology (MCIT), Government of India. This institute was established in 1989 and is located adjacent to the National Institute of Technology Calicut, about 20 km east of Calicut city. The Institute received assistance from UNDP (United Nations Development Program) and was also a participating institution under Project IMPACT of the World Bank and Swiss Development Co-operation for infrastructure development and faculty training.

About the Course: The M.Tech courses in ‘Embedded Systems’ and ‘Electronics Design Technology’ are four semester programs. These courses focus on practical design aspects of Embedded Systems and Electronic Product Design and are intended for students who wish to work in the Industry as Design Engineers. The core and elective papers are practical oriented. This program is also an excellent one for those aspiring to take teaching as a profession.

Eligibility Criteria:
a. The candidate shall be an Indian National
b. The candidate should have passed the B.Tech course or equivalent from an institution approved by the All India Council for Technical Education.
c. The eligible branches of engineering for each M.Tech are given under the eligibility criteria.
d. Candidates should have a minimum of 60% aggregate marks in the engineering degree examination. For SC/ST candidates, a pass in the engineering degree course is sufficient. For SEBC/PWD candidates, a minimum of 54% (aggregate) marks in the Engineering Degree examination is mandatory.
e. Admission shall normally be restricted to those candidates who have a valid GATE Score.
f. However Non GATE candidates can also apply. They will be considered against the vacancies due to lack of candidates with valid GATE score. These unfilled GATE seats will be filled with NON GATE candidates from Kerala State. They have to produce nativity certificate. If seats are still remaining vacant, candidates from other states will be considered for admission.
g. GATE score is not needed for Sponsored candidates.
h. Candidates who have passed AMIE/AMIETE Examination in Electronics and satisfying the following conditions are also eligible for admission.
a. They must have a valid GATE score
b. A Minimum marks of 55% in section B in AMIE/AMIETE Examination
c. Minimum 3 years of professional experience in the field of specialization after acquiring the qualifying degree.
i. GATE qualified candidates who have appeared for the final examination may also apply provided the results (mark lists/ confidential mark lists) are made available on or before 14-07-2015. Such candidates may be considered for provisional admission. Any candidate admitted provisionally as mentioned above shall have to discontinue the course, if he/she does not produce the final complete mark list and provisional/ degree certificate on or before 31.08.2015.

Selection Procedure:
The admission to the course shall be based on the following criteria:
1. For General and SC/ST category admission, preference shall be given to candidates who have a valid GATE score.
2. Should have passed the B.Tech/B.E course with a minimum of 60% marks.
3. SC/ST candidates should have minimum pass mark.
4. SEBC/PWD candidates should have a minimum of 54% (aggregate) marks in the Engineering Degree examination.
5. Should have valid GATE Score (see the eligibility criteria for each M.Tech)
6. Any seats unfilled by eligible GATE qualified candidates shall be filled with NON GATE candidates from KERALA state, the selection of which shall be based on marks in the qualifying degree examination. They should produce nativity certificate.
7. GATE qualified candidates awaiting results, but who have completed the engineering degree course and passed all subjects and are able to produce the proof of passing with complete mark lists or confidential mark lists from University on or before 14.07.2015 shall be considered for provisional admission. They have to produce the complete mark lists and provisional/degree certificate
on or before 31.07.2015. If they fail to meet admission criteria, the fees paid by them will not be refunded in any case.
8. In the case of students with the same GATE score then the selection shall be based on the marks in the Qualifying degree.

Fees: Fees shall be Rs 65,000/- per semester which includes the semester tuition fees of Rs 50,000/- and special laboratory tuition fees of Rs 15,000/-. University affiliation, examination and other fees is approximately Rs 8,000/- per year. Refundable caution deposit is Rs 5,000/-. The semester fee is excluding the hostel and food charges.

SC/ST students are eligible for full tuition fee waiver. However they need to pay the refundable caution deposit of Rs 5,000/- and University affiliation fee of Rs 8,000/-. Physically handicapped candidates can avail of 25% fee exemption on the tuition fee, if their annual family income is below Rs 1,00,000/- for which they need to produce income certificate from a Tahsildar. Other university fees shall be extra for students of all categories. Semester exam fees shall be as decided by KTU from time to time.

How to Apply
1. Candidates should apply on-line. After filling all the required fields, a print out of the application should be taken and sent to the M.Tech coordinator, NIELIT Calicut along with the appropriate application fees. On-line application link is – http://regn.calicut.nielit.in/
2. In case the on-line mode is not possible, one can use the appropriate application form for admission to M.Tech programme obtained from NIELIT Calicut or downloaded from NIELIT Calicut Website calicut.nielit.gov.in
3. A passport size photograph taken not earlier than 3 months is to be affixed on the Application Form. The photo in the application should be self-attested. Four more copies of the same photograph and one stamp size photograph should be produced at the time of counselling/admission.

For more details, download the attached brochure:

Download (PDF, Unknown)

Leave a Comment

Filed under Notifications

NIFTEM Notification for Various Courses in Food Technology – 2015

niftemNational Institute of Food Technology Entrepreneurship and Management
Deemed to be University (De-novo Category) under Section 3 of the UGC Act, 1956 and An Autonomous Institution under Ministry of Food Processing Industries, GOI
NIFTEM Campus, Plot No. 97, Sector-56, HSIIDC Industrial Estate, Kundli, District – Sonepat, Haryana -131028
Website: www.niftem.ac.in E-mail: admission@niftem.ac.in, admission.niftem@gmail.com Phone: 0130-2281100/01

ADMISSION NOTICE 2015-2016

SAVOUR YOUR CAREER WITH THE FLAVOUR OF NIFTEM,
THE GLOBAL EXCELLENCE IN FOOD TECHNOLOGY

ABOUT NIFTEM: National Institute of Food Technology Entrepreneurship and Management (NIFTEM) was conceptualized by Government of India on persistent demand of the food industry to have an Apex Organisation as a One Stop Solution Provider for the various problems of the sector. Ministry of Food Processing Industries (MoFPI), Government of India, has set up this institute with an initial investment of about ^500 crore (US $125 million). The Institute is spread over an area of 100 acres at a prime location in close proximity of Delhi-Haryana border on NH-1 only 35 km from New Delhi Railway Station. NIFTEM has been recognized as a Deemed to be University under De-novo Category by Ministry of Human Resource Development under University Grants Commission Act, 1956. Courses offered at NIFTEM are duly approved by All India Council for Technical Education (AICTE).

COURSES OFFERED

NIFTEM offers following academic programmes at its Kundli campus:

UNDER GRADUATE PROGRAMME

Four years regular B. Tech, degree in Food Technology and Management leading to the development of Techno-Manager for the food industries.

Eligibility: Candidates who passed Class 12lh Exam with Physics, Mathematics and one of the subjects from Chemistry, Bio-technology, Computer Science, Biology.

Candidates must be appearing in JEE (Main) -2015.

Selection Process: Based on JEE (Main) All India Overall Rank. Number of seats: 180

FIVE POST GRADUATE PROGRAMMES

Two years regular M. Tech, degree in 1. Food Supply Chain Management 2. Food Safety and Quality Management 3. Food Process Engineering and Management 4. Food Plant Operations Management 5. Food Technology and Management.

Eligibility: Four Years Bachelor’s Degree or Master’s degree in relevant discipline with minimum 60% marks in aggregate.

Selection Process: Based on valid GATE score/ NIFTEM Entrance Test for Non GATE candidates followed by Interview at NIFTEM.

Number of seats: 18 in each M. Tech, programme.

Due reservation is given to OBC (NCL)/ SC/ ST/ Physically Challenged and Kashmiri migrants candidates as per Government of India norms, provided they clearly mention their category in application forms.

PH.D. PROGRAMME
NIFTEM offers Ph.D. programmes in following areas: Agriculture and Environment Sciences 2. Basic and Applied Sciences 3. Food Engineering 4. Food Business Management 5. Food Science and Technology.

Eligibility: Master’s Degree in a relevant discipline with at least 60% marks. Preference is given to NET qualified candidates.

Number of seats: A total of 20 seats for Indian Nationals in five areas as above. In each department, 2 additional seats for candidates holding JRF/ SRF/ Inspire fellowships have been created.

Selection Process: Through Research Entrance Test organized by NIFTEM at NIFTEM campus, Kundli.

SCHOLARSHIP/FELLOWSHIP/ FINANCIAL ASSISTANCE
B.Tech. / M. Tech.: Meritorious students of NIFTEM are provided with Tuition fee waiver and fixed monthly stipend in the form of NIFTEM Merit Scholarship and NIFTEM Merit-Cum-Means Scholarship.

M.Tech.: AICTE scholarship for GATE qualified candidate.

Ph.D.: The NET qualified candidates shall be provided with NIFTEM Ph. D. Fellowship (Rs. 16000, 18000 and 20000 per month in the first, second and third year, respectively). Those without NET shall be provided with NIFTEM Ph.D. scholarship (Rs. 12000 per month).

HOW TO APPLY
Applicants are required to apply online and send duly signed printed copy of the application form. Applicant can also send printed application along with fee in DD to, “Head, Admission Cell.”

Online application and brochure are available on our website www.niftem.ac.in.

LAST DATE TO RECEIVE APPLICATION B. TECH. 19.06.2015 AND M. TECH/Ph.D. 24.06.2015.

Notification:

Download (PDF, 1.19MB)

Brochure:

Download (PDF, 25.75MB)

1 Comment

Filed under Notifications

M.Tech Program Admissions at Defence Institute of Advanced Technology – 2015

diatDefence Institute of Advanced Technology
(A Deemed to be University Under Section 3 of UGC Act 1956), Pune

M. Tech Programmes- July 2015 Batch

Applications are invited for admission to M. Tech Programmes, as per description below.

INTRODUCTION
Defence Institute of Advanced Technology (DIAT), Deemed University (DU), contributes significantly in the sphere of Human Resources Development for the Defence Forces by way of imparting education and training on Defence Technology to the officers of Armed Forces, Scientists of the DRDO, Technical Officers of the Ordnance Factory Board, Directorate of Quality Assurance, Public Sector Undertakings, General Public and friendly foreign countries. The University conducts M.Tech and Ph.D Programmes and offers a number of short-term courses.

M.TECH PROGRAMME
Applications are invited for admission to following M. Tech programs

Sl. No Name of the Program Descriptions
1. M.Tech in Sensor Technology with Specialisation in Laser & Electro­Optics (A) Eligibility:

(i) Qualification Requirements: 55% marks or 5.5 CGPA in Master degree or equivalent in Physics / Applied Physics / Electronics / Electronic Science/Instrumentation or a B. E. / B. Tech / B. Sc (Engineering) degree or equivalent in Electronics/ Electrical /Communication/ Telecommunication / Electronics / Instrumentation / E&TC Engineering / Engineering Physics
&
valid GATE score.

(ii) Age limit: Not more than 26 years as on July 1, 2015. Relaxations as per GOI rules apply to SC / ST / OBC / PH applicants

(B) No. of Seats: 06 (Six)

(C) Course Fee & Other Charges: Selected candidates for the M.Tech are required to pay Semester Fee @Rs. 10000/- per semester (subject to revision) payable immediately on joining and a caution deposit (refundable at the end of the Programme less dues if any) of Rs.10,000/-, commencing from July 2015.

(D) Scholarship: Selected candidate will be eligible for applying for scholarship [Rs.12400/- per month at present] under DBT Scheme of AiCTE during the M.Tech Course, subject to attendance. No financial support will be available from DIAT (DU), Pune

2 M.Tech in Technology Management (A) Eligibility:

(i) Qualification Requirements: 55% marks or 5.5 CGPA in B. E. / B. Tech / M. Sc.

(ii) Age limit: No age limit.

(B) No. of Seats: 06 (Six)

(C) Course Fee & Other Charges: Selected candidates for the M.Tech are required to pay Fee @Rs. 2,51,000/- per year (subject to revision) payable immediately on joining and a caution deposit (refundable at the end of the Programme less dues if any) of Rs.10,000/-, commencing from July 2015.

(D) Scholarship: No Scholaship will be available from DIAT (DU), Pune and under DBT Scheme of AICTE.

HOW TO APPLY: Candidates can download the form from the website www.diat.ac.in. Application fee of Rs.200/- (100/- for SC/ST candidates) per programme is required to be paid by Demand Draft drawn in favour of Vice Chancellor, DIAT, Pune, payable at Pune. Filled application form has to be forwarded to the Deputy Registrar (Academics), Defence Institute of Advance Technology, Pune 411025 along with the DD drawn and with the self certified copies of mark lists, certificates and other testimonials. These documents should reach DIAT latest by 15 Jun 2015. Application will be processed only on receipt of the acknowledgement with DD. Also Candidates seeking admission to more than one program need to apply separately.

GENERAL INFORMATION

  • Since the applications may be short listed, mere possessing of the prescribed qualifications would not entitle a person to be called for interview, if any. The Institute may restrict the number of candidates to be called for interview (if any) to a reasonable limit, on the basis of qualifications / marks higher than that of the minimum prescribed in the advertisement.
  • For short listing of candidates, the department screening committee may prepare branch wise list (i.e. different GATE score cut-off) where Qualification requirements are various branches.
  • Application once made will not be allowed to withdrawn and fees once paid will NOT be refunded on any count nor can it be held in reserve for any other admission process
  • Canvassing in any form will be a disqualification. Postal delay shall not be entertained.
  • No correspondence will be entertained in respect of advertisement, interview, selection etc. The list of Shortlisted candidate will be displayed on http://diat.ac.in website alongwith other information viz. date of Interview (if any) / Result. The candidates are requested to check the DIAT (DU) Website http://diat.ac.in for related information from time to time.

IMPORTANT DATES:

  • The application process will start on: 25 May 2015
  • Last Date of receipt of application: 12 Jun 2015
  • Tentative Date of Interview/Result: 4th week of Jun 2015
  • Tentative date of commencement of the programme: 06 Jul 2015

Download the notification for complete details:

Download (PDF, Unknown)

Leave a Comment

Filed under Notifications

JNTU Kakinada Self-financed PG Program Admissions – 2015

jntu kakinadaJAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY KAKINADA
KAKINADA-533 003. AP. INDIA

ADMISSION NOTIFICATION

Advt No. JNTUK / PG / Admns /SF / 2015               Dated: 20-05-2015

Applications are invited through online from 25-05-2015 for admission into 2-year Self-Financed PG Programs from Indian national students for the academic year 2015-16.

S. No Name of the Program No of Seats Collaboration
1. M.Tech VLSI design 25 SEER AKADEMI, Hyderabad & NPTEL. IITM
2. M.S. (Sports Science & Applied Medicine) 18 ——
M.S. (Environmental Occupa­tional Health & Safety) 18 ——
3. Collaborative MBA

*1 year at JNTUK & 1 year at CMU

18 Central Michigan University (CMU), USA
M.Tech / M.Sc in Telecommunications Systems (Double Degree Post graduate Program)

•6 months at JNTUK & 1-1/2 year at BTH, Swedan

10 Blekinge Institute of Technology, (BTH), Swedan

For eligibility Criteria, fee and other details, visit jntuk.edu.in The candidates are required to submit online application with application fee Rs.1000/- before 10-06-2015. The last date of application with a late fee of Rs. 500/- is 20-06-2015.

1 Comment

Filed under Notifications

IIT Kanpur Admission to Post Graduate Programmes – 2015

iit kanpur admissionsINDIAN INSTITUTE OF TECHNOLOGY KANPUR
Admission to Post Graduate Programmes for
2015-16-I Semester (July 2015)

Applications are invited for admission to the post graduate programmes for the academic session 2015-16-I semester commencing from 22 July, 2015.

Ph.D. (Engineering): M.Tech./ME/BE/BS(4Yr)/M.Sc. degree in the respective or allied area. The candidates with Bachelor’s degree in Engineering/ Technology or Master’s degree in Sciences in an allied area with exceptional academic record and having a valid GATE score may also apply. For Ph.D. in BSBE, candidate with MBBS, B.Pharma or M.Pharma Degree may also apply.

Ph.D. (Sciences & HSS): M.Sc./BE/BS(4Yr)/MA Degree in respective or allied area with a valid GATE/UGC/CSIR score.

Ph.D. (Management): A master’s degree in management / relevant disciplines in engineering / technology/ bachelor’s degree in engineering / science (4 year program).

Ph.D. (Design): A master’s degree in Engineering/ Technology/ Design.

M.Tech. (Engineering): B.Tech./BE./M.Sc.(Engg.) degree in the respective or allied area with a valid GATE score. For admission into M.Tech. in Biological Sciences and Bio-engineering, applicants having bachelor’s degree in pharmacy/medicine with marks/CPI not below the specified minimum may also be considered.

M.Des.: The applicants must have a bachelor’s degree in Engineering or science (4 year program), Design or Architecture with marks/CPI not below the specified minimum with a valid GATE / CEED score. Candidates holding degrees in Fine Arts or Interior Design are not eligible to apply.

Eligibility for Admission and Reservation of Seats
The eligibility conditions given below are the absolute minimum. Departments may prescribe any requirements over and above.

  1. The specified minimum marks/CPI (Cumulative Performance Index), referred to in subsequent sections, implies a minimum of 55 percent marks /5.5 (on a 10 point scale) as long as it is not less than the minimum pass marks/CPI; otherwise, the specified minimum marks/CPI implies the minimum pass marks/CPI.
  2. The number of admission that can be made to any programme shall be as decided by the Senate from time to time.
  3. Reservations (for SC/ST/OBC(NCL)/PD shall apply as per Government of India rules. The certificate for the same must be in the format specified.

GENERAL INFORMATION: All applications must be filled online. After filling the online application, one has to take a print out and send it to the department concerned, along with all the certificates, photograph, and a draft for application fee. The list of attachments are provided on the application page.

Financial assistance may be provided to students selected in M.Tech., M.Des. and Ph.D. programmes. Separate application must be filled for each programme.

IMPORTANT DATES:
The online applications will be available from 19th March 2015, till 15th April 2015.
The printed application form along with supporting documents and application fee must be received to the department(s) latest by 20th April, 2015.
The printed application form should be send directly to the respective departments as given in mailing address below.

Mailing Address :
The Convener, DPGC
Department/Programme of ____________________________________________________
(Kindly mention the Department name where you are seeking your admission)
Indian Institute of Technology Kanpur
Kanpur 208016

Separate application must be filled for each programme.

APPLICATION FEES
General , OBC candidates Rs. 400/-
PD, SC, and ST candidates Rs. 200/-
The fee must be paid through a demand draft payable to The Registrar, IIT Kanpur payable at Kanpur.

Brochure:

GDE Error: Error retrieving file - if necessary turn off error checking (404:Not Found)

Leave a Comment

Filed under Notifications

Netaji Subhas Institute of Technology M.Tech. / Ph.D. Admissions – 2015

nsitNETAJI SUBHAS INSTITUTE OF TECHNOLOGY
(An Autonomous Institute of Govt, of NCT of Delhi)
Azad Hind Fauj Marg, Sector-3
Dwarka New Delhi-110078
(Affiliated To University Of Delhi)

Admission to M.Tech./Ph.D. Programme
Academic Session 2015-16

On-line Applications are invited from eligible candidates for admission to M.Tech. programmes, (Full-Time/ Sponsored/ Part-Time) and Ph.D. programme (Full-Time) for the Academic session 2015-16.

For M.Tech. & Ph.D.: To be Started from 23.03.2015 upto 15.04.2015 (last date) Processing fee is Rs.1000/- (One Thousand only/-) and is Non-refundable.

The online application may be submitted by accessing the website http://www.nsit.nic.in upto the last dates as given above.

For other details, also log on to the institute website http://www.nsit.ac.in

Leave a Comment

Filed under Notifications

Part-Time M.Tech. Admissions at Osmania University – 2014

osmania admissionsUNIVERSITY COLLEGE OF TECHNOLOGY (A)
OSMANIA UNIVERSITY, HYDERABAD-500 007 (T.S )
Web site: www.ouct.ac.in
E-mail: principal@ouct.ac.in
Phones: 27098901 Extn:200/201 Fax: 040-27098472

NOTIFICATION

Admissions to Part-Time Post Graduate Programme under Self Finance in M.Tech. Chemical Engg ( Plant Design )/ Food Technology (Food Processing Tech.) / Textile Technology (Textile & Apparel Tech.) for the academic year 2014-15

Applications are invited for admission to Part-Time (6- Semester) Post Graduate Courses under Self Finance leading to M.Tech. Chemical Engg. (Plant Design)/ Food Technology (Food Processing Technology) /Textile Technology (Textile & Apparel Technology) for the academic year 2014-2015 No. of seats : 15 + 2 (for Sponsored Candidates) in each programme.

Selection: Through Entrance Test at UG Level conducted by UCT, OU, HYD-7

ELIGIBILITY:

  1. Experience: 2 Years Experience at the time of Admission in Industry / Academics/ R& D in Chemical Engg./ Food / Textile Fields
  2. Educational qualification:

A. For M.Tech Chemical Engineering (Plant Design)
Candidates should be with First Class in four year B.E / B.Tech Chemical Engg or AMIIChE or any other four year degree course equivalent to B.Tech Chemical Engg from a recognized University .

B. For M.Tech Food Technology ( Food Processing Technology )
Candidates should be with first class in four year B.Tech (Food Processing and Preservation Technology / Food Processing Technology / Food Technology /Food Science and Technology / Food Science /Food Process Engineering / Dairy Technology / Dairy Science / Oils and Fat Technology / Fermentation Technology / Food Engineering) and M. Sc. ( Food Technology / Food Science and Technology / Dairy Technology / Food Technology and Management / Marine Technology )

C. For M.Tech Textile Technology ( Textile & Apparel Technology)
Candidates should be with First Class in four year B.Tech.(Textile Technology/Textile Chemistry/Textile Engineering/Fibre Science & Technology/Apparel Technology/ Fashion Technology) / AMIE (Textile Engineering) / four year Degree in Apparel Production Management or its equivalent fiom any recognized University in the relevant subject.

Application form containing full particulars can be downloaded from the University website and College Website www.osmania.ac.in or www.ouct.ac.in.

For more details contact: Head, Chemical Engg: 096769 53636
Head, Food Technology: 09849173781
Head, Textile Technology: 09959560374

Notification:

GDE Error: Error retrieving file - if necessary turn off error checking (404:Not Found)

Leave a Comment

Filed under Notifications

Central Institute of Tool Design M.Tech. Program Admissions – 2014

citdCENTRAL INSTITUTE OF TOOL DESIGN
(A GOVT. OF INDIA SOCIETY, MINISTRY OF MSME)
BALANAGAR, HYDERABAD – 500 037 (A.P.) INDIA
(An ISO 9001: 2008, ISO 29990; 2010, ISO 14001:2004 & ISO 50001:2011 Certified Institution)

ADMISSION INTO M.Tech PROGRAMMES -2014

Central Institute of Tool Design is an ISO 9001:2008, ISO 29990:2010, ISO 14001:2004 & ISO 50001:2011 certified premier Institute in Asia to provide specialized training in Tool Engineering, CAD/CAM & Mechatronics. The objective of the Institute is to meet the requirements of the Industries in the field of Tool Design & Manufacture, CAD/CAM & Mechatronics & Robotics and to train the technical personnel in these fields. The Institute was originally established in the year 1968 by the Govt. of India with the assistance of UNDP and ILO. Applications are invited in the prescribed form for admission into the following Long Term courses conducted under Industry- Institution joint programme with JNTUH, Hyderabad, commencing from August 2014.

1. MASTER OF TECHNOLOGY (M.TECH)-MECHATRONICS – (2 years / 4 semesters)
(In Collaboration with JNTUH, Hyderabad. AICTE Approved)
25 seats (20 Self sponsored + 5 Industry sponsored)
Qualification:B.E./B.Tech.(Mechanical Engineering/Production Engineering/ Automobile Engineering / Electrical and Electronics/Electronics and Communication/Electronics and Instrumentation /Mechatronics OR Equivalent) with 55% marks
Course Fee: Self Sponsored – Rs. 37,000/- per semester Sponsored – Rs.46,000 per semester

2. MASTER OF TECHNOLOGY (M.TECH.) – ROBOTICS & AUTOMATION – (2 years / 4 semesters)
(In Collaboration with JNTUH, Hyderabad. AICTE Approved)
25 seats (20 Self sponsored + 5 Industry sponsored)
Qualification: B.E./B.Tech.( Electronics and Communication/Mechanical Engineering/ Electrical and Electronics/ Electronics and Instrumentation/Aeronautical/Automobile Engg.
OR Equivalent) with 55% marks.
Course Fee: Self Sponsored – Rs. 37,000/- per semester Sponsored – Rs.46,000 per semester

Age: 45 years

Cost of Application: Rs. 800/- for general category and Rs. 400/- for SC/ST category candidates and for PWD candidates fully exempted. However SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

Commencement of issue of Applications: 20-08-2014

Last date for submission of filled-in applications (upto 5.00pm at CITD) : 09-09-2014
Last date for submission of filled-in applications with late fee of Rs.500/- : 13-09-2014
Date of Entrance Examination : 20-09-2014 at 11.00 a.m. at JNTUH, Kukatpally,Hyderabad

MODE OF SELECTION: Application is common for both the programmes. However the selection in to a particular programme is based on the merit in the entrance and requisite qualification. Those who have applied for M- Tech (Mechatronics) are also eligible for both the programmes. Separate application is not necessary. The Institute reserves the right to cancel the programme, increase / decrease the intake of the students.

HOW TO APPLY:
A) Application form and prospectus can be obtained from Training Department, MSME-Tool Room /Central Institute of Tool Design, Balanagar, Hyderabad – 500 037, on any working day between 9:30 AM and 5:00 PM.(Weekly holiday on Sunday) by paying application cost prescribed by cash or a crossed demand draft drawn in favor of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.
B) Application form can also be downloaded from our website www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad.
C) Candidates who wish to consider their application under sponsored category, should submit the Xerox copies of sponsoring letter and experience certificate along with the application. No age limit for sponsored category candidates. The candidates under sponsored category will be allotted seats strictly based on the rank obtained in the CITD entrance examination subject to fulfilling the other criteria applicable to the category.
D) Reservation for SC/ST/PWD quota exists as per Govt. of India norms.

For further details, please contact Training Department Tel Phone No. 23771959, 23776156 :: Fax No. 040-23772658
Visit us at: www.citdindia.org E-mail: citdplacements@citdindia.org

Notification:

GDE Error: Error retrieving file - if necessary turn off error checking (404:Not Found)

Leave a Comment

Filed under Notifications